Driveshowers

Pleasure Boats and Performance Boats alike can benefit from a drive shower:
If there is a continuous need to remove a white chalky deposit from
the top half of your drive, it's probably running TOO HOT!!!

Website Special:
Summit Max: only $179.95 to as low as $134.95 (in quantities)**

**Quantity discounts for orders of 2, 3 and 5. See Order Page for details.

* Free UPS Ground Shipping on any size order
$29.95 USPS International Shipping on any size order

Website Special:
Halo Max®: only $199.95 to as low as $139.95** (in quantities)**

**Quantity discounts for orders of 2, 3 and 5. See Order Page for details

* Free UPS Ground Shipping on any size order
$29.95 USPS International Shipping on any size order

To keep Simrek's Multiport Driveshowers out in front of all our competitors, especially those that have simply copy our designs with a couple of added gimmicks and colors, this latest design of pick-up ports and mounting bracket system is now Protected by US Patent #7,666,042 B2, Issue Date Feb. 23, 2010.

If you've been reluctant to install a drive shower because you didn't want to drill holes in your drive, we have the answer. Our latest innovation; brackets that mount the shower using the lift ram assembly. Not only will this new mounting system NOT void your MerCruiser Corrosion Warranty, but it makes installation a snap. Simply swap out one bolt at the top of the drive and two nuts (or clips) on the lift rams.

Anyone that has used a garden hose knows that if you remove all the sharp bends from the hose, you will increase the flow of the water. Our new pick-up port system does just that. Gentle bends through out the entire system not only reduces drag, but it drastically increases the flow and volume of water to the top portion of the cooling system.

It is common for many new boats to come equipped with drive showers that are mounted by drilling hole in the anti-cavitation plate. MerCruiser is now saying that doing so will void your corrosion warranty. When asked about drilling holes in the drive to mount a shower, Rick Lang at Mercury Marine replied, "If an aftermarket component causes a failure, or in this case leads to corrosion damage... our warranty will not cover the damage/failure". Also, for SeaCore product "under no circumstances should the surface of the finish be damaged or it will corrode and there will be no warranty". These new showers still use a pin located near the inlet which acts as a debris filter. By dividing the tube in half, anything small enough to get past the pin will also be small enough to get out the dump ports. We have the only system that guards against the shower plugging up with debris, which without warning; will cause them to failing at cooling your drive. We remain the industry leader because we offer only cutting edge designs, not gimmicks! We are often copied, but as always, the copiers will always be lagging behind the innovators.

Do any of these conditions detract from your boating fun?

A continuous need to remove a White Chalky Deposit from the top of your drive.
An unexplainable need to keep Topping Off Your Drive Oil Reservoir.
My Drive Oil Reservoir Overflows or has exploded!
I just spent $3800 to have my Drive Rebuilt, plus I was without a boat for
three weeks!
I already have a drive shower, but it keeps plugging up with debris from the water.
I had a driveshower, but it caused my prop to cavitate.

A Multiport Driveshower could be the solution.

By removing 55 to 65 degrees off your drive oil operating temperature.
They include Pick-up Ports that supply water at any trim angle.
Won’t plug up with debris because of its water filtration system.
Locating the pick-up ports outboard of the anticavitation plate and ahead of the prop eliminates the potential for causing prop cavitation.
They install in 10 minutes or less with no drilling.
Formula Boats uses them as standard equipment on many of their boats. Why didn’t your boat come with one?

For more information about a particular condition topic, click on the following links:

* UPS Ground shipping applies to the 48 Continental US States. Orders being shipped to Alaska, Hawaii, Canada or International locations, should use the International Shipping Rate. For Expedited orders, contact Simrek by phone or email for shipping costs.